城市轨道交通车辆能耗计量及管理系统

介绍了城市轨道交通车辆能耗计量及管理系统的结构、功能.城市轨道交通车辆能耗计量及管理系统采用六通道能耗计量装置和RFID(射频识别)列车定位技术,实现了对地铁车辆能耗的分类计量.建立GPRS(通用分组无线服务)无线传输数据机制和地铁车辆能耗管理平台,处理并存储能耗数据,自动生成曲线和统计报表,实现地铁车辆能耗信息化管理.该系统已在上海轨道交通1号线01A02车型上试点应用,基本功能已得到验证.     

三峡库区船舶碰撞能量损失方法的研究

采用外部碰撞力学方法计算2艘2 000 t级化学品船以不同速度,不同碰撞角,在不同碰撞点相撞后的能量损失,并利用显示动力有限元软件LS_DYNA模拟2艘化学品船在能量损失最大情况下碰撞的响应.     

能效设计指数EEDI功率曲线的直接计算方法

船舶能效规则强制生效后，所有适用船舶必须满足Attained EEDI≤Requied EEDI的条件，因此准确估算或预报功率曲线从而计算得到Attained EEDI将对适用船型具有极为重要的意义。根据国内外关于功率-转速-航速预报的最新进展，依据螺旋桨敞水性能图谱，采用KT/J^2系数，给出了功率曲线的直接计算方法，经实际算例验证，该方法相对传统的间接计算方法更为清晰简便，且结果准确可靠。     

关于发展我国现代物流业的思考

中国企业急需增强现代物流的意识，积极采用先进的组织方式和管理技术。同时，为改善投资环境，也迫切需要提供高质量的现代物流服务。     

船舶传染病隔离舱空调系统设计的探讨

介绍了船舶传染病隔离负压舱的空调系统设计的特点和思路,结合一典型传染病舱模型进行空调系统设计,对舱内污染控制分区进行了分区设置,对换气次数、负压值、空调负荷、空气处理等主要技术指标进行了计算和结果分析。结合舱内空调负荷介绍了通风换气设备与节能措施,根据传染病隔离负压舱空调系统的特点选取了相应的热回收装置,并描述了其工作原理和特点。     

寒冷地区公路隧道节能照明设计

鉴于快速发展的公路隧道在设计及运营管理过程中暴露出的许多不足,如由于我国照明设计规范中的设计照明参数值较大,公路隧道照明耗电负荷大于90 k W/km,高耗电现象较多,故导致很多隧道运营时往往只使用设计照明负荷的1/2或1/3,甚至很多低等级公路隧道干脆不开照明灯,给隧道运营带来了安全隐患。文章就完善公路隧道节能照明设计展开分析,力求对公路隧道节能照明设计提供借鉴。     

Mitigating the effect of impact loading on a vehicle using an essentially nonlinear absorber

The aim of this study is to investigate the ability of an essentially nonlinear vibration absorber to mitigate the large accelerations transmitted to a passenger compartment of a vehicle which is subjected to shock-type transient loading at the chassis. For such problems, the induced vibration typically attains its maximum value shortly after the application of the loading; thus, it may be impossible to dissipate a major portion of the input energy prior to the occurrence of the peak response. Here, a class of absorbers possessing a form of discontinuous essential stiffness nonlinearity is employed to achieve the desired mitigation. In this paper, we apply a single vibro-impact (VI) absorber to the chassis and examine whether the resulting energy transfer mechanism is an effective way to reduce the peak value of the inertial force measured at the passenger compartment. The influence of the absorber parameters is first studied based on a practical impulsive force, and the optimal design of the absorber is then obtained. Next, an asymmetric clearance arrangement of the absorber is suggested to facilitate the mitigation. Finally, an impulsive acceleration excitation is applied to the system to examine the robustness and efficacy of the optimised absorber. Results of numerical simulations demonstrate that a properly designed VI absorber can significantly decrease the maximum inertial force at the passenger compartment, generated by external impulsive excitations.     

Role of Bus‐Based Park and Ride in the UK: A Temporal and Evaluative Review

Abstract

The number of bus‐based Park and Ride (P&R) schemes in the UK has grown substantially over the past 40 years as a result of its encouragement by the Government as a tool to deal with increasing traffic congestion and traffic‐related pollution. The aim of this article is to analyse the degree to which P&R is effective in the contemporary policy context. The authors identify phases of development of P&R since its emergence as a local solution to transport capacity constraints in historic towns. Policy goals are identified against which a review of literature is used to highlight its effectiveness. It is concluded that P&R may increase the distance travelled by its users due to low load factors on dedicated buses, public transport abstraction and trip generation, although it is highlighted that there are areas in which further research is required to clarify its impacts.     

基于卷积型小波包变换的船用水位调节器故障辨识

以某型蒸汽船的主冷凝器水位调节器为研究对象,应用卷积型小波包变换提取各种故障信号分解后的相对小波包能量,建立水位调节器标准故障库,并引进Euclidean空间距离公式作为判据进行故障识别。实验结果表明,该方法可以对水位调节器的典型故障进行快速、正确分类,降低了其故障定位与维修的盲目性。     

企业开展电子商务的研究

文章阐述了电子商务的重要性和迫切性，提出了企业开展电子商务的操作思路和应注意的问题．以及如何创造电子商务营销环境的问题．为企业开展未来市场营销提供了新思路。